TOP BEST WAYS TO TAKE CARE OF YOUR MEASURING INSTRUMENTS.

The following precautions should be taken when using measuring instruments of all types:

READ MORE: 4 Most Best Used Measuring Instruments you must have in a workshop

(1) Clean both the measuring faces of the instruments and the work-piece very carefully to remove all dirt's, oil, and metal chip.

(2) Check the instrument for accuracy before using. Adjust and re-check, if necessary.

(3) Do not use on any moving surface.

(4) Do not hold the instrument on the hands for longer than is necessary. The heat of the hand is sufficient to cause an expansion which will affect the accuracy of the reading.

(5) Keep the measuring faces at right angles to the work-piece.

(6) Avoid excessive pressures on micrometer spindle. Use the ratchet. Do not over strain the fine adjustment device on the vernier caliper.

(7) Do not use measuring instrument for any purpose for which they were not designed.

(8) Do not throw precision instrument down on to the bench - keep them apart from ordinary tools and always return them to their cases when not actually in use.

(9) Clean after use and give a thin film of non - corrosure oil.

READ MORE: TOP 7 PRECAUTIONS TO TAKE WHILE USING THE MARKING OUT TOOLS

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY FACEBOOK PAGE, AND SUBSCRIBE TO GET THE LATEST UPDATES..

• Share This

Read More

12 Important Machine Tool Safety Precautions you need to know.

(1) Use the right size of blade for the screws.

(2) Use a crescent wrench on the blade to get more torque.

(3) You will get more driving force with a shorter shank.

(4) For the stubborn screw, fit the driver in the screw put as much downward pressure as you can on the screw driver, and strike the end with a hammer. This will pop the screw loose and it also helps with worn out or stripped out screws.

READ MORE: Top 7 Best Tips to Getting the Most Out Of Your Screwdriver.

(5) Some people can magnetize a screw driver by holding it up and striking it with a metal bar. This process realigns the molecules, making it magnetic. But be extremely careful when doing this to avoid breaking the screwdrivers.

(6) Get a prybar, keep it with your screw driver, and each time you need a prybar, leave your screw drivers alone.

(7) Before you drive screws into hardwood, make sure to put beeswax on the thread of screws as this will make the screws driving more easier. If you don't have a beeswax, you can use soap alternatively.


I HOPE IT WAS HELPFUL???

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY FACEBOOK PAGE, AND SUBSCRIBE TO GET THE LATEST UPDATES..

• Share This

Read More

Top 7 Best Tips to Getting the Most Out Of Your Screwdriver.

I have been able to draft out some basic best tips for you so as for you to get the most out of your screwdrivers, and i hope they are helpful for you. 

 (1) Use the right size of blade for the screws.

(2) Use a crescent wrench on the blade to get more torque.

(3) You will get more driving force with a shorter shank.

(4) For the stubborn screw, fit the driver in the screw put as much downward pressure as you can on the screw driver, and strike the end with a hammer. This will pop the screw loose and it also helps with worn out or stripped out screws.

READ MORE: 12 Important Machine Tool Safety Precautions you need to know.

(5) Some people can magnetize a screw driver by holding it up and striking it with a metal bar. This process realigns the molecules, making it magnetic. But be extremely careful when doing this to avoid breaking the screwdrivers.

(6) Get a prybar, keep it with your screw driver, and each time you need a prybar, leave your screw drivers alone.

(7) Before you drive screws into hardwood, make sure to put beeswax on the thread of screws as this will make the screws driving more easier. If you don't have a beeswax, you can use soap alternatively.

PLEASE DON'T FORGET TO SHARE, COMMENT, FOLLOW US, LIKE MY FACEBOOK PAGE, AND SUBSCRIBE TO GET THE LATEST UPDATES..

• Share This

Read More